Loading...
Articles
Triumph Rocket III - Rocket III

The original model was released in 2004. This model trim is no longer available. The Rocket III Roadster is now the only version available. This model was awarded Motorcycle Cruiser magazine's 2004 Bike of the Year, Motorcyclist's 2004 Cruiser of the Year, and Cruising Rider magazine 2005 Bike of the Year. This model is the newest exhibit at the UK National Motorcycle Museum.

Apple III - Apple III Plus

Apple discontinued the III in October 1983 because it violated FCC regulations, and the FCC required the company to change the redesigned computer's name. It introduced the Apple III Plus in December 1983 at a price of US$2,995. This newer version includes a built-in clock, video interlacing, standardized rear port connectors, 55-watt power supply, 256 kB of RAM as standard, and a redesigned, Apple IIe-like keyboard.

Apple III - Apple III Plus

Owners of the Apple III could purchase individual III Plus upgrades, like the clock and interlacing feature, and obtain the newer logic board as a service replacement. A keyboard upgrade kit, dubbed "Apple III Plus upgrade kit" was also made available – which included the keyboard, cover, keyboard encoder ROM, and logo replacements. This upgrade had to be installed by an authorized service technician.

SAPS III - DID SAPS III

Each of these values are given points based on value intervals, similar to SAPS II, and a score is calculated. The actual result is not a general SAPS III score, but can be considered an updated version of SAPS II.

SERCOS III - Sercos III stack

Sercos III also supports an operating system and hardware platform independent “Soft Master”, using a completely software-based stack for the master interface. Since the maximum jitter in such a configuration is dependent upon the operating system of the Master, the maximum jitter may be set by a variable for the Sercos III network when a Soft Master is employed. A standard Ethernet controller can be used for applications with line topology, bus cycle times greater than 500 us, and microsecond range synchronization. Applications with higher synchronization requirements and lower bus cycle times can be implemented using a TTS-capable Ethernet controller with a suitable real-time operating system.

SAPS III - DID SAPS III

The Danish Intensive care Database (DID) has a standard-form to calculate SAPS III scores for their specific purpose, and require participating ICUs to provide:

SERCOS III - Sercos III cycle

The network remains available to UCC traffic until the next cycle begins, at which time Sercos III closes the nodes to UCC traffic again. This is an important distinction. Sercos is purposely designed to provide open access at all ports for other protocols between cyclic real time messages. No tunneling is required. This provides the advantage that any Sercos III node is available, whether Sercos III is in cyclic mode or not, to use other protocols, such as TCP/IP, without any additional hardware to process tunneling. Sercos nodes are specified to provide a store and forward method of buffering non-Sercos messages should they be received at a node while cyclic communication is active.

SERCOS III - Sercos III cycle

Communication across a Sercos III network occurs in strict cyclic intervals. A cycle time is chosen by the user for a given application, ranging from 31.25 µs to 65 ms. Within each cycle, data is exchanged between Sercos III nodes using two types of telegrams: MDTs and ATs (see Telegram Types). After all MDTs and ATs are transmitted, Sercos III nodes allow the remaining time in the cycle to be used as an UC (Unified Communication) Channel, which can be used to exchange data using other formats, such as IP.

UltraSPARC III - UltraSPARC III Cu

The UltraSPARC III Cu, code-named "Cheetah+", is a further development of the original UltraSPARC III that operated at higher clock frequencies of 1002 to 1200 MHz. It has a die size of 232 mm 2 and was fabricated in a 0.13 μm, 7-layer copper metallization, CMOS process by Texas Instruments. It was packaged in a 1,368-pad ceramic LGA package.

Ribonuclease III - Types of RNase III

Class 1 RNase III *Class 1 RNase III enzymes have a homodimeric structure whose function is to cleave dsRNA into multiple subunits. It is a Mg 2+ -dependent endonuclease and is largely found in bacteria and bacteriophage. Class 1 RNase III have been found in Glomeromycotan fungi, which was suspected to be the result of horizontal gene transfer from cyanobacteria. Among the RNases III in the class are the rnc from E. coli. Typically, class I enzymes possess a single RNase III domain (RIIID) followed by a dsRNA-binding domain (dsRBD). They process precursors to ribosomal RNA, small nuclear RNA (snRNA) and small nucleolar RNA (snoRNA). The basic dsRNA cleavage function of Class 1 RNase III is retained in most of the organisms in which it is present. However, in a number of species the function has changed and taken on different or additional biological roles.

Seuthes III - Tomb of Seuthes III

The Tomb of the Thracian King Seuthes III is situated in Bulgaria in the Golyamata Kosmatka mound, at a distance of 1 km south from the town of Shipka north from the town of Kazanlak (Bulgaria). It was discovered in 2004 by the Bulgarian archaeologist Georgi Kitov. The Tomb was built in the second half of the fifth century BC. Items found inside included the golden crown of the ruler, a golden kylix (shallow wine cup), knee pads and a helmet, and applications for horse tackle, all exhibited in the historical museum of the town of Kazanlak. Remarkable is the bronze head of the statue of Sevt III buried ritually in front of the façade, which is quite detailed. It is an important evidence of the Thracian Orphic rituals. The tomb temple consists of a corridor, an anteroom, a round chamber with high tholos cover, and a rectangular chamber, constructed as a sarcophagus from two monolith blocks, one weighing more than 60 tons. The three halls are built of rectangular stone blocks and are covered with slabs. A two-winged marble door closes the entrance to the round chamber. The upper plains of the wings are decorated with images of the god Dionysus, who in the east part embodies the sun and in the west the earth and night. The ritual couch and the ritual chamber are placed in the rectangular chamber. They were covered with fabric made of a golden thread, after that a splendid funeral of the ruler was performed. Above the phial, the jug, and the helmet was inscribed the name of Seuthes, which proves that in the beginning of third century BC here was buried Seuthes III, the famous Thracian ruler of the Odrysian kingdom.

Medium Mark III - Medium Mark III

The disappointment of the A6 led to the "Medium Mark III", being ordered in 1928 and constructed from 1930. It was similar to the A6 but featured a new turret and improved armour. The turret had a flat gun mantlet and a bulge at the back to hold the radio set. The secondary machine-gun turrets were moved more to the front to shift the centre of gravity of the vehicle forward to improve its stability and larger brakes were fitted. In 1933 trials were completed of the first two prototypes; the type was reliable and provided a good gun platform. The failings of the suspension continued; even though road speed increased to 30 mph, the bogies were often overloaded during cross-country rides. Three Mark IIIs, E1, E2 and E3, were built, one by Vickers and two by the Royal Ordnance Factory at Woolwich. The third had an improved suspension and in 1934, the vehicles were taken into use by the HQ of the Tank Brigade. No orders followed due to its high price; Medium III E2 was lost to a fire. One Mark III was fitted as a command vehicle with an extra radio aerial around the turret. This was used by Brigadier Percy Hobart for the Salisbury Plain exercises during 1934.

IFF Mark III - IFF Mark III

Another problem that had been seen in Mark II as the number of radar sets in use increased was that the number of interrogation signals being received began to swamp the transponder's ability to reply. A related issue made tracking distant targets difficult; in the case where two aircraft were being interrogated by a single radar, their responses would not overlap because the more distant aircraft was not triggered until the signal reached it at a later time. However, if the nearer aircraft was being interrogated by more than one radar, its responses to those other radars might occur at the same time as the other aircraft's response to the first, masking it. Mark III addressed both of these problems, the first by adding a delay so the transponder responded only after receiving 4, 5 or 6 pulses. Additionally, as the interrogation rate increased, the Mark III began to lower its output signal, so that more distant aircraft signals were not masked.

Ribonuclease III - Types of RNase III

* Class 3 RNases III include the Drosha family of enzymes known to function in maturation of precursors to miRNA.

IFF Mark III - IFF Mark III

This change also realized two additional advantages. Radar signals were typically horizontally polarized which improved the interaction with the ground or sea surface. However, this also meant the antenna on the aircraft should ideally be horizontal as well. This was not easy to arrange, and the antenna often didn't align with the transmitter, so signal reception was often a problem. With the move to a separate transmitter, the signal could be vertically polarized instead. Mark III antennas were a simple quarter-wave unipole projecting down from the bottom of the aircraft, which provided excellent omnidirectional reception as long as the aircraft was not upside down.

Ricardian (Richard III) - Richard III Society

In 1980, Prince Richard, Duke of Gloucester, became the society's Patron. (Richard III was Duke of Gloucester before ascending the throne, therefore he was before his accession (Prince) Richard, Duke of Gloucester).

Soulcalibur III - Soulcalibur III: Arcade Edition

Soulcalibur III: Arcade Edition is a re-tuned and glitch-fixed version of Soulcalibur III that was first released in the arcades on April 3, 2006. Almost the entire cast from the home version returns as playable characters except Abyss, who is now a non-playable boss character alongside Night Terror. From the 17 bonus characters only three made it into the arcade: Hwang Seong-gyeong, Li Long and Amy Sorel, who have been reworked and expanded into more deep playing styles. The total roster of the arcade ascends to 27 selectable characters.

Mu-Tron III - Mu-tron III

Extracting elements from one of the prototypes of a synthesizer he was developing for Guild Guitar Company, Mike Beigel based the Mu-Tron III, at the instigation of Guild engineer Aaron Newman, on a prototype called the Timbre Generator. The Mu-tron III could be used for any number of electric instruments. Beigel said he chose the envelope-controlled filter over other synthesizer elements, such as ring modulation, because it sounded more musical; it was a more general effect that would lend itself to a variety of applications, and it was easy to use.

Loading...